Campbell CS100 Manuel télécharger pdf (Page 14)

CS100 Barometric Pressure Sensor

7. Installation

7.1 Enclosure Considerations

To prevent condensation, install the sensor in an environmentally protected

enclosure, complete with desiccant, which should be changed at regular

intervals.

Failure to protect the sensor from condensation may result

in permanent damage.

CAUTION

The CS100 is typically mounted in a Campbell Scientific enclosure next to the

datalogger. Campbell Scientific also offers the ENC100 for situations where it

is desirable to house the CS100 in its own enclosure. The ENC100 is a 6.7-in.

x 5.5-in. x 3.7-in. enclosure that includes a compression fitting for cable entry,

a vent for equalization with the atmosphere, a backplate for mounting the

CS100, and hardware for mounting the ENC100 to a tripod, tower, or pole (see

FIGURE 7-1).

FIGURE 7-1. ENC100 is a very small enclosure that can house one

CS100

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Pas de commentaire

Campbell CS100 Manuel Page 14