Campbell SC-USB Manuel

SC-USB USB to CS I/OOpto-Isolated InterfaceRevision: 1/12Copyright © 2004-2012Campbell Scientific, Inc.

SC-USB USB to CS I/O Opto-isolated Interface 3.1.1 Windows 7 Connect the SC-USB to a spare USB port on your PC. If there is an available internet co

SC-USB USB to CS I/O Opto-isolated Interface Once the control panel appears, click ‘Hardware and Sound’... Now click ‘Device Manager’... 5

SC-USB USB to CS I/O Opto-isolated Interface In the Device Manager you will see ‘SC-USB USB TO CS I/O INTERFACE’ listed under ‘Other Devices’ with a y

SC-USB USB to CS I/O Opto-isolated Interface You will now be given the choice to search automatically or browse for driver software. Click the second

SC-USB USB to CS I/O Opto-isolated Interface You will probably now be presented with the following window indicating that the publisher can’t be verif

SC-USB USB to CS I/O Opto-isolated Interface Once this part of the installation is complete you will see the following confirmation... ...click ‘Clos

SC-USB USB to CS I/O Opto-isolated Interface You will now notice a new device ‘USB Serial Port’ displayed under ‘Ports (COM & LPT), again with a y

SC-USB USB to CS I/O Opto-isolated Interface You will now be given the choice to search automatically or browse for driver software. Click the second

SC-USB USB to CS I/O Opto-isolated Interface You will probably now be presented with the following window indicating that the publisher can’t be verif

SC-USB USB to CS I/O Opto-isolated Interface Once this part of the installation is complete you will see the following confirmation... ...click ‘Clos

SC-USB USB to CS I/O Opto-isolated Interface 3.1.2 Windows Vista To install the drivers on a Vista PC you will need administrative rights or access t

SC-USB USB to CS I/O Opto-isolated Interface If you are installing from a CD insert it now. If the PC does not find the drivers or if you are instal

SC-USB USB to CS I/O Opto-isolated Interface The process of installing the drivers should then complete and show this screen. Shortly after, a messag

SC-USB USB to CS I/O Opto-isolated Interface 3.1.3 Windows 2000/XP Use the USB cable to connect your SC-USB device to the PC’s USB port. The first t

SC-USB USB to CS I/O Opto-isolated Interface If installing from CD, you can select the automatic option; if you are installing from another source, th

SC-USB USB to CS I/O Opto-isolated Interface The Wizard will then continue through a number of steps, e.g. Rather than completing it will appear to r

SC-USB USB to CS I/O Opto-isolated Interface 3.1.4 Windows 98/98SE/ME Use the USB cable to connect your SC-USB device to the PC’s USB port. The firs

SC-USB USB to CS I/O Opto-isolated Interface Select ‘Search for the best driver….’ and click ‘Next’. You will then see the screen shown below. Selec

SC-USB USB to CS I/O Opto-isolated Interface In most cases the above process will be repeated as Windows first installs the USB interface controller

SC-USB USB to CS I/O Opto-isolated Interface As shown below the com port number is shown at the end of the description. In some cases a PC program

Warranty “PRODUCTS MANUFACTURED BY CAMPBELL SCIENTIFIC, INC. are warranted by Campbell Scientific, Inc. (“Campbell”) to be free from defects in materi

SC-USB USB to CS I/O Opto-isolated Interface 3.2 Set-up Modes – the SC_USB Programming Utility The Set-up button on the SC_USB.exe utility allows you

SC-USB USB to CS I/O Opto-isolated Interface 3.2.1.2 Selecting a Fixed Baud Rate Bit rate selections available are 9600, 19200, 38400, 57600, 76800 a

SC-USB USB to CS I/O Opto-isolated Interface 3.2.1.7 Enable ME Comms Mode Selecting ‘Enable ME Comms Mode’ will force the SC-USB to only respond as a

SC-USB USB to CS I/O Opto-isolated Interface port, select the new COM port number assigned to the SC-USB (see Section 3.1.6), and then press Connect.

SC-USB USB to CS I/O Opto-isolated Interface 28 these cases the SC-USB needs to be set to a fixed baud rate. This can either be done using the SC-USB

Campbell Scientific Companies Campbell Scientific, Inc. (CSI) 815 West 1800 North Logan, Utah 84321 UNITED STATES www.campbellsci.com • info@campbel

Assistance Products may not be returned without prior authorization. The following contact information is for US and international customers residing

SC-USB Table of Contents PDF viewers: These page numbers refer to the printed version of this document. Use the PDF reader bookmarks tab for links t

SC-USB Table of Contents ii Figure 1-1. Most of the components shipped with the SC-USB ... 2

SC-USB USB to CS I/O Opto-isolated Interface The SC-USB is designed to allow Campbell Scientific dataloggers to communicate directly with computers fi

SC-USB USB to CS I/O Opto-isolated Interface FIGURE 1-1. Most of the components shipped with the SC-USB. SC12 cable and ResourceDVD not shown. 2. T

SC-USB USB to CS I/O Opto-isolated Interface • PC software compatibility PC200W, PC400, LoggerNet, RTDAQ and most other packages that support virtual