Campbell CS300 Manuel d'instructions télécharger pdf (Page 9)

CS300 Pyranometer

1. Introduction

The CS300, manufactured by Apogee Instruments, measures total sun and sky

solar radiation for solar, agricultural, meteorological, and hydrological

applications. Its spectral range of 360 to 1120 nanometers encompasses most

of the shortwave radiation that reaches the Earth’s surface. This pyranometer

connects directly to our dataloggers. Its output can be measured by all of our

dataloggers.

2. Cautionary Statements

• READ AND UNDERSTAND the Precautions section at the front of this

manual.

• Care should be taken when opening the shipping package to not damage or

cut the cable jacket. If damage to the cable is suspected, consult with a

Campbell Scientific applications engineer.

• Remove the green cap after installing the sensor. Save this cap for

shipping or storing the sensor.

• Handle the sensor carefully when cleaning. Be careful not to scratch the

surface of the sensor.

3. Initial Inspection

• Upon receipt of the CS300, inspect the packaging and contents for

damage. File damage claims with the shipping company.

4. Quickstart

Short Cut is an easy way to program your datalogger to measure the CS300 and

assign datalogger wiring terminals. Use the following procedure to get started.

1. Install Short Cut by clicking on the install file icon. Get the install file

from either www.campbellsci.com, the ResourceDVD, or find it in

installations of LoggerNet, PC200W, PC400, or RTDAQ software.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 27 28

Pas de commentaire

Campbell CS300 Manuel d'instructions Page 9