Campbell CS526 Spécifications télécharger pdf (Page 23)

Appendix A. Importing Short Cut Code

This tutorial shows:

• How to import a Short Cut program into a program editor for additional

refinement.

• How to import a wiring diagram from Short Cut into the comments of a

custom program.

A.1 Importing Short Cut Code into a Program Editor

Short Cut creates files that can be imported into CRBasic Editor program editor.

These files normally reside in the C:\campbellsci\SCWin folder and have the

following extensions:

• .DEF (wiring and memory usage information)

• .CR1 (CR1000 datalogger code)

• .CR8 (CR800 datalogger code)

• .CR3 (CR3000 datalogger code)

Use the following procedure to import Short Cut code into CRBasic Editor

1. Create the Short Cut program following the procedure in Section 4,

Quickstart. Finish the program and exit Short Cut. Make note of the file

name used when saving the Short Cut program.

2. Open CRBasic Editor.

3. Click File | Open. Assuming the default paths were used when Short Cut was

installed, navigate to C:\CampbellSci\SCWin folder. The file of interest has a

“.CR1”, “.CR8”, or “.CR3” extension, CR1000, CR800, or CR3000

dataloggers, respectively. Select the file and click Open.

4. Immediately save the file in a folder different from \Campbellsci\SCWin, or

save the file with a different file name.

Once the file is edited with CRBasic Editor, Short Cut can no longer

be used to edit the datalogger program. Change the name of the

program file or move it, or Short Cut may overwrite it next time it is

used.

5. The program can now be edited, saved, and sent to the datalogger.

6. Import wiring information to the program by opening the associated .DEF

file. Copy and paste the section beginning with heading “-Wiring for

CRXXX–” into the CRBasic program, usually at the head of the file. After

pasting, edit the information such that a ' character (single quotation mark)

begins each line. This character instructs the datalogger compiler to ignore

the line when compiling the datalogger code.

NOTE

A-1

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

Pas de commentaire

Campbell CS526 Spécifications Page 23