Campbell COM9522B Manuel d'instructions télécharger pdf (Page 24)

9522B Iridium Satellite Modem and COM9522B Interface Modem

5.1.5 Step 5: PakBusPort Configuration

As shown in FIGURE 5-5, select the PakBusPort. Be sure the

Communications Enabled box is checked, change the Maximum Baud Rate

to 19200 (9600 for a CR10X), set the Beacon Interval to 0, set the Extra

Response Time to 15 seconds, and, if present, set the Delay Hangup to 200

ms.

You may change other settings in this configuration to suit your particular

application. Once complete, move to Step 6 to configure the datalogger.

FIGURE 5-5. PakBus Port Configuration

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Pas de commentaire

Campbell COM9522B Manuel d'instructions Page 24