Campbell COM9522B Guide de l'utilisateur télécharger pdf (Page 21)

User Guide

4. Datalogger Configuration

To ensure proper communications with the datalogger it will be necessary to

configure the datalogger. This can be done via the Device Configuration Utility.

Follow the instructions provided to make a connection to the datalogger.

Figure 13. Device Configuration Utility

Once connected select the ComPorts Settings tab (Figure 14), set the Verify Interval

to its maximum value of 26213 seconds and select the “19.2K Fixed” Baud Rate for

the RS-232 port. If you require the use of the CSI/O port for communications, select

the CSI/O – ME ComPort and set the Baud Rate to “19.2K Fixed”. . If you require

the use of the COM port for communications, select the appropriate COM Port and

set the Baud Rate to “19.2K Fixed”.

Make any additional changes required for your application, and apply the settings to

save the changes.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 45 46

Pas de commentaire

Campbell COM9522B Guide de l'utilisateur Page 21