Campbell Raven II Manuel télécharger pdf (Page 28)

RavenXTG GPRS/EDGE Sierra Wireless Cellular Modem

c. Select the “Serial” Group, and make sure the “AT Verbose Mode” is

set to “Numeric” for use with the CR10(X), CR510, and CR23X

dataloggers, or “Verbose” for other dataloggers (e.g., CR1000).

The “RavenXTG GPRS/EDGE Template 9600” template file sets the baud rate

to 9600, which is the maximum baud rate for the CR10X and older

dataloggers. For newer dataloggers, the baud rate can be changed to the

highest baud rate supported by the datalogger (e.g. 115200 baud for the

CR1000).

Baud rate changes require the modem to be reset before the

change takes affect. Click the Reset icon in AceManager to the

reset the modem and implement the change.

NOTE

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 53 54

Pas de commentaire

Campbell Raven II Manuel Page 28