Campbell Raven II Manuel télécharger pdf (Page 33)

Appendix A. AceManager Setup

without Template File

AceManager is used to program settings in the RavenXT modems to make the

modems compatible with CSI dataloggers. Sierra Wireless CDMA and

GPRS/EDGE template files to send the modems are available on the CSI

website (www.campbellsci.com/downloads). The procedure for sending the

template files is described in Section 5, Using AceManager to Program the

Modem.

When the template files are not available, AceManager can be used to change

the settings described below.

For a direct connection on a COM port use PPP.

Make a note of the Device port (*DPORT). The default is 12345 and we use

3001 in our template. Any valid port can be used. This is the port number

used in LoggerNet to get to the datalogger.

A-1

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 53 54

Pas de commentaire

Campbell Raven II Manuel Page 33