Campbell RavenXTG GPRS/EDGE Spécifications télécharger pdf (Page 17)

Raven110 GPRS/EDGE AirLink Cellular Modem

The modem has to be configured using Wireless Ace 3G as described in

Section 5.

Modem settings have to be changed, and the APN number entered, using

Wireless Ace 3G (Section 5). After the Raven GPRS template file has been

loaded, you can verify settings in the Status, Misc, Serial, and GPRS groups

have been configured as shown below.

Network State should be “Network Ready”. Signal strength (RSSI) should be -

60 to -85. The IP address will change for Dynamic IP accounts.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 37 38

Pas de commentaire

Campbell RavenXTG GPRS/EDGE Spécifications Page 17