Campbell RavenXTG GPRS/EDGE Spécifications télécharger pdf (Page 27)

Appendix B. Installation of SIM Card in

the Raven110

The Subscriber Identity Module (SIM) in the Raven is a smartcard securely

storing the key identifying a mobile subscriber. Generally, you will only need

to install the SIM once in the life of the modem.

Installing the SIM

To install the SIM, you will only need a small phillips head screw driver.

Opening the Case

1. Unplug the modem power and all cables.

2. Using a small phillips head screw driver, remove the two screws on the

back of the modem.

FIGURE B-1. Modem Back

3. Slide the casing off of the modem and set it aside.

FIGURE B-2. Modem Partially Slid from Case

Ejecting the SIM tray

4. Using the tip of a closed pen, a paper clip, or PDA stylus, press the yellow

button between the two cards.

B-1

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 37 38

Pas de commentaire

Campbell RavenXTG GPRS/EDGE Spécifications Page 27