Campbell RavenXTG GPRS/EDGE Guide de l'utilisateur télécharger pdf (Page 105)

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 100

Windows Dial-up Networking (DUN)

a. Select Start > Connect > To Show All Connections to open the Network Connections

window.

FIGURE 9. Network Connections

b. Select Create a New Connection un

der Network Tasks in the menu area on the left. Select

Next to start installing and configuring the DUN connection.

c. Select Connect to the Internet and then select Nex

FIGURE 10. Connection Type

d. Select Set up

my connection manually and then select Next.

Caution: If you have an existing LAN connection, installing DUN for the modem

may interfere with the LAN connection. It's recommended to disconnect your

LAN connection before using a PPP connection with your Raven.

Once the DUN connection is initiated, by default, it will take over as the “default

route”

for network communication and specifically for Internet access. If you want

the two connections to co-exist, you will need to de-select “Use default gateway on

remote network” (described later) and use the route command in Windows to setup

routing through the modem properly. This guide does not provide information on

the route command. You may need to consult with your network administrator to

properly configure routing.

Create a new network connection.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 130 131

Pas de commentaire

Campbell RavenXTG GPRS/EDGE Guide de l'utilisateur Page 105