Campbell RavenXTG GPRS/EDGE Guide de l'utilisateur télécharger pdf (Page 71)

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 66

AT Commands: Serial

DS=n

S3=n

S4=n

Allows a PPP connection to be initiated on the host port.

n=2 : Initiates the PPP connection.

Cannot be configured in Wireless Ace.

Toggle AT command echo mode.

n=0 : Echo Off

n=1 : Echo On

Hang-Up Command.

n=1: Hang-up

With an AT telnet connection, this command will terminate the host data mode and return the

Raven to an AT mode.

Cannot be configured in Wireless Ace.

Online (Remote): Causes the Raven to go from Command State to data state.

Cannot be configured in Wireless Ace.

The AT quiet-mode setting. If quiet mode is set, there will be no responses to AT commands

except for data queried.

n=0 : Off (Default)

n=1 : Quiet-mode on

Carriage Return Character

n=0-127 (ASCII character number )

The standard end of line character used to indicate the end of an AT command. This character

is also used as the carriage return character for framing responses and result codes in command

state.

Cannot be configured in Wireless Ace.

Line Feed Character

n=0-127 (ASCII character number )

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 130 131

Pas de commentaire

Campbell RavenXTG GPRS/EDGE Guide de l'utilisateur Page 71