Campbell CS451 Manuel télécharger pdf (Page 13)

CS451/CS456 Submersible Pressure Transducer

The CS451/CS456 has two communication options: SDI-12 or RS-232. The

CS451/CS456 is shipped from the factory with both communications options

enabled; there is no configuration required. As an SDI-12 sensor, the

CS451/CS456 is shipped with an address of 0.

Two values are output by the CS451/CS456—pressure/level and temperature.

The CS451/CS456 is shipped from the factory to output pressure in psig and

temperature in degrees Celsius.

The CS451/CS456 has three nose cone options. FIGURE 5-1 shows the nose

cone options. The weighted nose cone makes the transducer easier to

submerge to depth. The NPT nose cone allows the transducer to be used in

closed-pipe applications. The nose cones can be switched out later.

Standard Nose Cone

Weighted Nose Cone

PT Nose Cone

FIGURE 5-1. CS451 nose cone options

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 35 36

Pas de commentaire

Campbell CS451 Manuel Page 13