Campbell CS455 Manuel télécharger pdf (Page 13)

CS450/CS455 Pressure Transducer

FIGURE 3-3. Connect screen

There are three settings that can be changed: SDI-12 address, Pressure/Level

Units and Temperature Units. Double-click on the window of the units to be

changed. This will open a pick menu box. Select the desired units and Apply

the changes (see Figure 3-4).

kPa

FIGURE 3-4. Configure units

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 33 34

Pas de commentaire

Campbell CS455 Manuel Page 13