Campbell AVW200 series Manuel d'instructions télécharger pdf (Page 16)

A.1.4 Control Ports

Configuration: 4 digital I/O ports

Input/output resistance: 100kΩ/330Ω, respectively

Input “high” level: 3.8 V to 5.3 V

Input “low” level: -0.3 V to 1.2 V

Output “high” level: 5 V ±0.1 V

Output “low” level: <0.1 V

A.1.5 Model 8032 Multiplexer (See the Appendix F complete specifications)

A.1.6 AVW200 Vibrating Wire Interface (See AVW200 Manual for complete

specifications)

Power requirements: 9.6-16 VDC

Vibrating Wire measurement current: 25 mA

Quiescent current: .3 mA

APPENDIX B - SHIP LIST

B.1 Hardware

The following equipment is included with the system:

• External Power cable

• DB-9 to 10 pin Bendix RS-232 Cable

• USB to RS-232 Adapter

• Small regular screwdriver

• Spare slo-blo fuses (5), 2 amp

• AC Adaptor (110 VAC or 220 VAC)

The following manuals are included:

• MICRO-800 Instruction Manual

• Campbell Scientific Resource disk

Optional accessories:

• COM220 Landline Phone Modem with manual (access Datalogger via phone line)

• Cellular Phone Modem with manual

• Short Haul Modems with manual (current loop communication device)

• MD485 RS-485 Multidrop Interface with manual (Datalogger networking)

• Solar Panel with mounting hardware, charger, and manuals

• RF Modem with manuals (wireless Datalogger communication)

Consult the factory for additional information on any of the optional accessories.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 46 47

Pas de commentaire

Campbell AVW200 series Manuel d'instructions Page 16