Campbell IRGASON Manuel télécharger pdf (Page 27)

IRGASON Integrated CO

O Open-Path Gas Analyzer and 3D Sonic Anemometer

7.14 ECMon

Settings for the IRGASON are easily verified or changed using the Windows

PC support software ECMon (Eddy Covariance Monitor), which is found on

the IRGASON, EC150 & EC155 Support CD (p/n 27007) or at

www.campbellsci.com

Before installing ECMon, read the file titled _Read_me.txt found on the

IRGASON, EC150 & EC155 Support CD. This file directs the user to install

USB drivers (also found on the support CD), which are required for

communications between the PC and the EC100 via the EC100 USB cable (p/n

26561). Some newer PC operating systems will automatically find and

download the USB drivers from the internet when the USB cable is connected

to the PC. Once the drivers are installed, download and run the ECMon.exe

install file. Launch ECMon, and connect the EC100 electronics to the PC with

the included EC100 USB cable (p/n 26561). The USB connection for the

EC100 electronics is found on the base of the enclosure (see Figure 6-7). Once

connected, select the appropriate communications port in the ECMon main

page and click Connect (see Figure 7-1). Next, click on the Setup button. All

of the preceding settings are now available for editing (see Figure 7-2).

Besides changing settings, ECMon is a useful tool for common tasks such as:

• Monitoring real-time data from the IRGASON from the main window

• Performing manual zero and span of the instrument (see Section 9.4, Zero

and Span)

• Troubleshooting and monitoring diagnostics using the Status window.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 58 59

Pas de commentaire

Campbell IRGASON Manuel Page 27