Campbell IRGASON Manuel télécharger pdf (Page 29)

IRGASON Integrated CO

O Open-Path Gas Analyzer and 3D Sonic Anemometer

FIGURE 7-2. Setup window in ECMon

7.15 Device Configuration Utility

DevConfig software (Device Configuration Utility) may also be used to

change settings, although ECMon is generally preferred because of its more

user-friendly interface. DevConfig may be downloaded from the IRGASON,

EC150 & EC155 Support CD (p/n 27007), or may be downloaded free of

charge from the Campbell Scientific website www.campbellsci.com

DevConfig requires a USB driver to communicate with the EC100, similar to

ECMon. See Section 7.14, ECMon for notes on installing a USB driver.

After launching DevConfig, select “EC100” from the list of device types. The

EC100 electronics should be connected to the PC with the EC100 USB cable

(p/n 26561) and the appropriate USB port selected before connecting. Once

connected, the settings tab displays all the current settings. The Apply button

must be clicked to save any changes.

DevConfig is also used to send an updated operating system to the EC100

electronics. The Send OS tab gives directions on this procedure.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 58 59

Pas de commentaire

Campbell IRGASON Manuel Page 29