Campbell RavenXTG GPRS/EDGE Spécifications télécharger pdf (Page 38)

Appendix C. Configuring the Raven for PPP

Use WirelessAce to configure the following PPP settings:

• HOSTPRIVMODE = 1 (Changed from 0 — use Public IP)

• HOSTPRIVIP = 192.168.1.1

This will configure the Raven to use NAT (Network Address Translation).

These settings should be configured by the template.

Use WirelessAce to configure the following UDP setting:

• MD = 02-PPP (Changed from 00 — Normal, AT command)

After the changes have been made, click the Write icon to save the changes in

the modem

Click the Reset icon to restart the modem. The other ways to reset the modem

are by pressing the reset button on the front of the modem or removing the

power from the modem.

Click the Disconnect icon to terminate communications with the modem.

C-2

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Pas de commentaire

Campbell RavenXTG GPRS/EDGE Spécifications Page 38