Campbell CS475 Manuel d'utilisateur télécharger pdf (Page 18)

CS475, CS476, and CS477 Radar Water Level Sensor

5. Choose the outputs and then select Finish.

6. Wire according to the wiring diagram generated by Short Cut.

5. Overview

The CS475, CS476, and CS477 emit short microwave pulses and measure the

elapsed time between the emission and return of the pulses. The elapsed time

measurement is used to calculate the distance between the sensor face and the target

(for example, water, grain, slurry). The distance value can be used to determine

depth.

These radar sensors output a digital SDI-12 signal to indicate distance and stage.

This output is acceptable for recording devices with SDI-12 capability including

Campbell Scientific dataloggers.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 47 48

Pas de commentaire

Campbell CS475 Manuel d'utilisateur Page 18